Bambu Hotend Series - 0.2/0.4/0.6/0.8mm & 0.4mm High Flow Hotend
Compatibility: Bambu Lab H2 series
Quick Swap Nozzle Design
The special design of H2D hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch for quick and easy hotend removal and installation.
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
0.2mm Nozzle - Optimal Print Fineness
Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface
0.6mm and 0.8mm Nozzle - Faster Print Speed
Larger diameter extrudes more filaments per second, resulting in faster print speed
Real High Flow: Save Up to 30% of Your Time
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
High-Speed Precision: Sharp Details Every Time
Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.
Upgrade now and print faster without compromise!
| Product Specifications |
|
| Max. Printing Temp. |
350℃ |
| Length |
49.2 mm |
| Packaging Weight |
0.026 kg |
| Packaging Size |
60×60×30 mm |
| Filament |
0.2 mm
Stainless Steel |
0.4 mm
Hardened Steel |
0.6 mm
Hardened Steel |
0.8 mm
Hardened Steel |
0.4 mm High Flow
Hardened Steel |
| PLA Basic |
√ |
√ |
√ |
√ |
√ |
| PLA Matte |
√ |
√ |
√ |
√ |
√ |
| PLA Basic Gradient |
√ |
√ |
√ |
√ |
√ |
| PLA Silk+ |
√ |
√ |
Not recommended |
Not recommended |
√ |
| PLA Silk Dual Color |
√ |
√ |
Not recommended |
Not recommended |
√ |
| PLA Silk |
√ |
√ |
Not recommended |
Not recommended |
√ |
| PLA Metal |
√ |
√ |
√ |
√ |
√ |
| PLA Marble |
Not recommended |
√ |
√ |
√ |
√ |
| PLA Sparkle |
Not recommended |
√ |
√ |
√ |
√ |
| PLA Wood |
Not recommended |
√ |
√ |
√ |
√ |
| PLA Galaxy |
Not recommended |
√ |
√ |
√ |
√ |
| PLA Glow |
X |
√ |
√ |
√ |
√ |
| PLA-CF |
X |
√ |
√ |
√ |
√ |
| PLA Aero |
X |
√ |
Not recommended |
Not recommended |
√ |
| PETG HF |
√ |
√ |
√ |
√ |
√ |
| PETG Translucent |
不推薦 |
√ |
√ |
√ |
√ |
| PETG-CF |
X |
√ |
√ |
√ |
√ |
| ABS |
√ |
√ |
√ |
√ |
√ |
| ABS-GF |
X |
√ |
√ |
√ |
√ |
| ASA |
√ |
√ |
√ |
√ |
√ |
| ASA Aero |
X |
√ |
Not recommended |
Not recommended |
√ |
| ASA-CF |
X |
√ |
√ |
√ |
√ |
| PC |
√ |
√ |
√ |
√ |
√ |
| PC FR |
√ |
√ |
√ |
√ |
√ |
| TPU for AMS |
X |
√ |
√ |
√ |
√ |
| TPU 95A HF |
X |
√ |
√ |
√ |
√ |
| TPU 85A |
X |
X |
√ |
√ |
X |
| TPU 90A |
X |
√ |
√ |
√ |
X |
| PAHT-CF |
X |
√ |
√ |
√ |
√ |
| PET-CF |
X |
√ |
√ |
√ |
√ (Only for Left Hotend) |
| PA6-CF |
X |
√ |
√ |
√ |
√ |
| PPA-CF |
X |
√ |
√ |
√ |
√ (Only for Left Hotend) |
| PPS-CF |
X |
√ |
√ |
√ |
√ (Only for Left Hotend) |
| Support for ABS |
X |
√ |
√ |
√ |
√ |
| Support for PLA/PETG |
√ |
√ |
√ |
√ |
√ |
| Support for PA/PET |
X |
√ |
√ |
√ |
√ |
| Support for PLA (New Version) |
√ |
√ |
√ |
√ |
√ |
| PVA |
X |
√ |
√ |
√ |
√ |
| PA6-GF |
X |
√ |
√ |
√ |
√ |