Bambu Lab PETG-HF Series — Avaliable for 7 Colors
• White • Red • Blue • Gray • Yellow • Green • Orange
PETG HF is a fully optimised PETG filament designed specifically for high speed printing. With a standard print speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to new heights. It effectively addresses common problems such as bleeding and clumping associated with regular PETG, ensuring smoother and more reliable prints. The new matte finish not only improves aesthetics by smoothing out uneven gloss during speed transitions, but also provides a consistent look.
With greater durability and toughness than PLA, PETG HF is the ideal choice for creating durable items with an improved finish and faster production times.
* Thanks Adrian Luben (Social Handle: @Marsgizmo) for creating this video.
Designed for High Speed Printing
Twice faster than standard PETG*, PETG HF increases productivity without compromising print quality.Print a complete spiral vase
Time saving of about 43 per cent
Print a complete spiral vase
Time Saving Of About 43%
* The speed of PETG HF can be twice as fast as regular PETG, but achieving this speed is highly dependent on model size and geometry.
[1] Actual printing speed depends on model selection, please refer to the actual situation.
[2] Model size : 126*126*250 mm³, Print model : Bambu Lab A1, nozzle diameter : 0.4mm, nozzle temperature : 255°C, layer height : 0.2mm, fill density : 0%.
Print Flawlessly with Minimal Adjustment
PETG HF is the most printable of the PETG filaments, with greater adaptability to printers and print settings, giving ideal print results without the need to fine-tune parameters. Thanks to advanced formulation optimisation, PETG HF eliminates bleeding and clumping, resulting in smoother prints with sharp details.
左：普通 PETG — 列印細(xì)節(jié)粗糙，右：PETG HF — 列印細(xì)節(jié)清晰
Smooth, Soft Texture
PETG HF offers a smooth texture and consistent gloss at any print speed, ensuring uniformity and sharp detail in every print.
Ready for Outdoor Use
PETG HF retains the inherent strengths of regular PETG, offering superior water, UV and temperature resistance. Tougher and more durable than PLA, with higher temperature resistance, it's the perfect choice for printing outdoor items such as plant pots, bird cages, watering cans and automotive parts.
It's also ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions and drops.
Recommended Printing Settings
| Diameter |
1.75 mm |
| Net Filament Weight |
1000 g |
| Spool Material |
ABS (Temperature resistance 70 °C) |
| Spool Size |
Diameter: 200 mm; Height: 67 mm |
| Drying Settings before Printing |
Blast Drying Oven: 65 °C，8 h
X1 Series Printer Heatbed: 75 - 85 °C, 12h |
| Printing and Storage Humidity |
< 20% RH (Sealed, with desiccant) |
| Nozzle Temperature |
230 - 260 °C |
| Build Plate Type |
Smooth PEI Plate, Textured PEI Plate |
| Bed Temperature |
65 - 75 °C |
| Cooling Fan |
0 - 60% |
| Printing Speed |
< 300 mm/s |
| Retraction Length |
0.8 - 1.4 mm |
| Retraction Speed |
30 - 60 mm/s |
| Chamber Temperature |
35 - 50 °C |
| Max Overhang Angle |
~ 70 ° |
| Max Bridging Length |
~ 30 mm |
Physical Properties
| Density |
1.28 g/cm³ |
| Vicat Softening Temperature |
70 °C |
| Heat Deflection Temperature |
ISO 75 1.8 MPa : 62 °C
ISO 75 0.45 MPa 69 °C |
| Melting Temperature |
214 °C |
| Melt Index |
28.2 ± 2.7 g/10 min |