Phrozen Standard ABS-like 3D Printing Resin Series (1kg)
Phrozen ABS-like 3D printing resin produces high-resolution, strong 3D printed parts that are ideal for general modelling and industrial applications. Its light colour also makes it ideal for painting models such as 3D printed figures after curing.
Two Colors :
Matte Gray
Creamy White
Phrozen resin must be shaken well before use and can be stored in a dry, ventilated place at room temperature (15-35°C).
Key Features：
．Low Shrinkage & High Precision
Phrozen ABS-like 3D Printing Resins create high-quality prints with low shrinkage.
．Low Viscosity & Low Odor
Print & post-process all your 3D models with ease. Bonus: Your place won’t reek of resin fumes anymore.
．A Wide Range of Application
Create tough & resilient printed parts that can be used for painting or industrial applications.
Matte Gray - 3D Printing Samples :
Creamy White - 3D Printing Samples :
Precautions：
．Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
．After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
．Keep resin away from kids and away from direct sunlight exposure.
．Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
．DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Click to Watch：
Phrozen Slicing Tutorial
Enjoy the light-curing printing experience with Phrozen's wide range of resins, which can be tailored to your needs and properties to give you the best finished product, or contact us for more information !
Matte Gray
| Density |
1.10g / cm3 |
| Viscosity |
67 cP |
| Elongation at Break |
3 % |
| Tensile Stress at Break |
10 MPa |
| Tensile Modulus |
116 MPa |
| Notched Izod Impact |
1.44 J/m |
| Contact Angle |
60° |
| Surface Hardness |
76 Shore D |
| Weight |
1KG |
| XY Surface Resolution |
0.050 mm |
| Suggested Thickness of Layer |
30-100 um |
| HDT at 0.45MPa |
46 ℃ |
| Recommended Cleaning Method |
Alcohol spray cleaning and air drying
(Alcohol should not be soaked for more than 30 seconds) |
| Suitable Machines |
Phrozen 3D Printer Series |
Creamy White
| Density |
1.10g / cm3 |
| Viscosity |
77 cP |
| Elongation at Break |
2% |
| Tensile Stress at Break |
12 MPa |
| Tensile Modulus |
95 MPa |
| Notched Izod Impact |
2.32 J/m |
| Contact Angle |
55° |
| Surface Hardness |
79 Shore D |
| Weight |
1KG |
| XY Surface Resolution |
0.050 mm |
| Suggested Thickness of Layer |
30-100 um |
| HDT at 0.45MPa |
47 ℃ |
| Recommended Cleaning Method |
Alcohol spray cleaning and air drying
(Alcohol should not be soaked for more than 30 seconds) |
| Suitable Machines |
Phrozen 3D Printer Series |