Sinterit Sandblaster
The Sandblaster is designed for cleaning, polishing, and finishing of SLS 3D printing object, using dry Abrasive Material. Thanks to some compressed air and little glass balls (Abrasive Material) using Sandblaster you can penetrate all of the corners of your model and highlight every detail.
The process is clean and easy:
Post-processing of SLS printed parts is an easy task. You don’t need to remove any supports, neither mechanically nor chemically. All you need to do is to get rid of spare powder connected to your printed parts. The best and cleanest method is to use compressed air and a sandblaster. With this device you will clean and polish the surfaces.
| Type |
Manual |
| Working area |
410 x 310 x 200 mm (16.1 x 12.2 x 7.9 in) |
| Max. pressure |
0.86 MPa / 125 psi |
| Coupling |
DN 7.2 |
| Max. abrasive material capacity |
4.5 kg (9.9 lbs) |
| Dimensions |
480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in) |
| Weight |
15 kg (33 lbs) |
| Illumination power |
6 W |
| Illumination Input voltage |
230 V / 50 Hz or 120 V / 60 Hz |
| Abrasive material |
glass balls 200 μm |
| Required Air flow |
300 L/min |
| Required Pressure |
0.6 – 0.86 MPa (87 – 124.7 psi) |