Snapmaker 2.0 Emergency Stop Button (A150/ A250/ A350)
Snapmaker 2.0 Emergency Stop Button applies to Snapmaker 2.0 Rotary Module. Start rotary carving, something went awry, press the Snapmaker 2.0 Emergency Stop Button, and start fresh again. The Snapmaker 2.0 Emergency Stop Button is designed to provide an extra layer of safety for 3D printing, laser engraving, and CNC carving. Simply press the stop button and your operation will come to a halt.
．Installed anywhere - safety guarantee
The Snapmaker 2.0 Emergency Stop Button can be installed practically anywhere, which means you can easily access the stop button when it matters most. If you wanted to salvage your art piece or the bit was about to crash into the machine, you pressed the stop button without thinking and further potential harm was prevented.
．Glowing status indicators
The Snapmaker 2.0 Emergency Stop Button connects to the main controller of the machine. It sends a stop signal to the controller at your command and has glowing status indicators, green for standby, flashing red for activated, and alternating between green and red for connecting, so you know you are protected.
| Dimensions |
48 width × 40 depth × 68 height (mm), without conversion plate
48 width × 48 depth × 78 height (mm), with conversion plate |
| Weight |
0.2 kg |
| Rated Voltage |
24 V |
| Rated Current |
0.01 A |